|
|
| Kanga M Range of Slasher & Rotary Cutters |
| |
|
| |
| Deck Material |
5mm, Fully Welded Top with 10mm Side Walls. |
| Deck Profile |
Folded, Clean Top Design with Rounded Back. |
| Deck Reinforcing |
40x16mm Full Sub-Frame. |
| Gearbox |
75hp (540rpm) 1:1.93 (1500 & 1800mm) or 1:1.46 (2100mm) ratio with 6 Spline Input Shaft. |
| PTO Shaft |
Series 6 (64hp/48kw), Triangular Profile Tube and Safety Covers with Patent Lever Release. |
| Clutch |
2 Plate, 200mm (8 inch) Safety Clutch. |
| Finish |
Acrylic Urethane Undercoat & Automotive Enamel Top Coat. |
| Tower |
Multi-Mount, 90x16mm, Double Clevis, Floating. |
| Tower Offset |
Positive Locking Multi-Mount (Centre Mount with 200mm (8 inch) left or right Offset). |
| Tower Chain |
13mm T80 Rated Chain. (Max. load 4500kg). |
| Skids |
Adjustable Skid (25-100mm) with 6mm Wall and 12mm Runner. |
| Cutter Bar |
100mm Spring Steel, bolt together with Drive Lugs and Counter sunk Blade Bolts. |
| Blades |
Hardened Carbon/Chrome (spring steel) Stepped down, Twisted with Replaceable Hardened Bush. |
| Linkage/Mounting |
Double Clevis, Category 1/2 Lower Linkage with Category 2 Pins and clips. |
| Front & Rear Chains |
10mm Front and Rear Safety Chain with wire rope replacement system. |
|
|
|
|
|
