|
|
| Kanga XH Range of Slasher & Rotary Cutters |
| |
|
| |
| Deck Material |
Galvanised 6mm, Fully Welded Top with 12mm Side Walls. |
| Deck Profile |
Folded, Clean Top Design with Rounded Back. |
| Deck Reinforcing |
40x20mm Full Sub-Frame. |
| Gearbox |
130hp (540rpm) 1:1.92 (1800mm) or 1:1.467 (2100mm) ratio with 20 Spline Input Shaft. |
| PTO Shaft |
Series W2600 (120hp/90kw), Star Profile Tube and Safety Covers with Patent Lever Release. |
| Clutch |
150hp, 6 Plate, 200mm (8 inch) Safety Clutch. |
| Finish |
Deck, Hot Dip Galvanised. Other parts, Electrophoretic Undercoat & Automotive Enamel Top Coat. |
| Tower |
Multi-Mount, 90x16mm, Double Clevis, Floating. |
| Tower Offset |
Positive Locking Multi-Mount (Centre Mount with 200mm (8 inch) left or right Offset). |
| Tower Chain |
13mm T80 Rated Chain. (Max. load 4500kg). |
| Skids |
Adjustable Skid (40-130mm) with 8mm Wall and 16mm Runner. |
| Cutter Bar |
130mm Spring Steel, bolt together with Drive Lugs and Counter sunk Blade Bolts. |
| Blades |
Hardened Carbon/Chrome (spring steel) Stepped down, Twisted with Replaceable Hardened Bush. |
| Linkage/Mounting |
Double Clevis, Category 2 Linkage with Pins and clips. |
| Front & Rear Chains |
10mm Front and Rear Safety Chain with wire rope replacement system. |
|
|
|
|
|
