Kanga Farm Equipment has been a leading supplier of Agricultural Tractor Implements since 1981. With a solid reputation for producing high quality implements, Kanga Farm Equipment's range consists of Grader Blades, Rotary Slashers (commonly known as Slashers), Post Hole Diggers, Carryalls, Cultivators, Bale Handling Equipment, Rippers and Harrows. Kanga Farm Equipment are "Your 3-Point Linkage Implement Specialists."
Kanga Farm Equipment produces a range of 3-Point Linkage Tractor Grader Blades.
The Mini Range, S Range and M Range Grader Blades all allow the user to angle the blade (28 positions through 360 degrees) and have three (3) lower linkage pins holes. By using the top hole on one side and the lower on the other, you can put a slight tilt or camber on the Grader Blade. All three Grader Blades also come with an Offset (left/right) feature which, in the case of the 1.2m Mini Grader Blade is very unique, as the majority of 1.2m Grader Blades on the market in Australia do not offer an Offset feature.
The Multi Clamp Grader Blade is a Dog Clamp Grader Blade that allows the user to adjust the tilt, angle and offset in 5 degree increments up-to 45 degrees left/right (or up/down) using a series of Dog Clamps. Full reinforced and strengthened the Multi Clamp Grader Blade is suited to tractors in the 35-70hp range.
Kanga also offer a range of Hydraulic Grader Blades for tractors 50-130hp - the H Range Grader Blade covers the 50-90hp range, while the XH Range Grader Blade is rated 90-130hp.
The H Range Grader Blade can be supplied with 3Ó Hydraulic Rams or Manual Ratchet Jack. It is made of 5mm Rolled Hollow Section (RHS) and is reinforced for extra strength. The Grader Blade blade section is 8mm and all pivot plates are cut from 16mm plate.
The XH Range Grader Blade is a fully Hydraulic Grader Blade with 4" Rams. It is main body is 9mm Rolled Hollow Section (RHS) and moving parts are turned out of high quality shafting steel. All points are fully reinforced and gusseted for extra strength while the pivot plates are all 20mm thick.
All Kanga 3-Point Linkage Tractor Grader Blades have a hardened grading edge.